Recommended socket settings (for E14 socket):
Material: PLA or PETG
Wall Loops: 3
Infill density: 5-10% (the more infill, the heavier the lamp)
Infill pattern: rectilinear or as desired
No support material required
Recommended lampshade settings:
Material: PLA or PETG (preferably transparent or white)
Wall Loops: 2
Infill density: 5-10%
Infill pattern: rectilinear or as desired
No support material required
Matching textile cable and the corresponding E14 socket can be found here:
https://www.stoffkabel.kaufen/Textilkabel-mit-Schalter-und-Flachstecker
https://www.stoffkabel.kaufen/E14-Thermoplast-Fassung-schwarz-Glattmantel-mit-Zugentlaster-Kunststoff-schwarz
With a note to the manufacturer that the cable and socket may already be professionally assembled.
Important: This lamp was designed for an E14 lamp socket ,
So it is designed for an E14 LED 2.5 to 4w max. 400lm light bulb.
Have fun printing!
äm | äs | ka Design Studio and Martina Skvaro assume no liability for improper use of the products I offer, for the use of incorrectly inserted light bulbs, incorrectly inserted print materials, or for misprints. Only light bulbs that cannot get hotter than 40 degrees should be used. Please choose E14 LED light bulbs with 2.5-4.0 watts and a maximum of 400 lm. An E14 lamp socket should also be used for this lampshade. The light bulb must NOT touch the printed plastic! Always turn off lamps when leaving the house!
By downloading this file, you agree not to resell the downloaded data. 3D prints made from this file may be used for private purposes and given away as gifts—but may not be resold under any circumstances.
top of page
CHF10.00Price
bottom of page