This base was designed for the following socket: "AAi Mobile Light Fitting," available from Galaxus. I use a large-diameter LED opal bulb from Micasa (OPAQUE RA90 E27 max. 7.5 W, diameter 12.5). You can find this or similar models from various suppliers such as Micasa, Jumbo, or Manufactum.

 Material used: Silk PLA+

 Recommended settings:
 Wall Loops: 3
 Infill density: 10-15%
 Infill pattern: rectilinear or as desired
 No support material required


 äm | äs | ka Design Studio and Martina Skvaro assume no liability for the use of incorrectly inserted light bulbs, incorrectly inserted printing materials, or for printing errors. Only light bulbs that cannot exceed 40 degrees Celsius should be used. Please select E27 LED light bulbs with a maximum of 7.5 watts. An E27 lamp socket should also be used for this lampshade. Light bulbs must NOT touch the printed plastic! Always turn off lamps when leaving the house!

 By downloading this file, you agree not to resell the downloaded data. 3D prints made from this file may be used for private purposes and given away as gifts—but may not be resold under any circumstances.

 Have fun printing!